The Data Is Corrupted 8002F957: Troubleshooting Your PS3 Jailbreak Are you experiencing an error message that says 'the data is corrupted' when trying to jailbreak your PlayStation 3 (PS3)? This common issue can be frustrating, especially after spending hours attempting the process. Fortunately, there are several solutions you can try before giving up.

The first step in resolving this problem is to ensure that all files have been copied correctly from a trusted source onto an external storage device such as a USB drive or memory stick. Specifically:

1. Copy your PS3 jailbreak ROM (firmware) file into the following directory structure on your USB drive:

- PS3

- UPDATE

2. Within this 'UPDATE' folder, create another subfolder named exactly: 'PS3UPDAT.'

3. Place your downloaded PUP file inside of it and name it 'PS3UPDAT.PUP.' Ensure that both the file extension '.PUP' is present and correctly spelled.

4. Shut down your PC completely by pressing and holding the power button for at least five seconds until all lights have stopped blinking or turning off.

5. Carefully disconnect any internal hard drives from within your PS3 console, as well as unplugging both HDMI cables if they are still connected to an external monitor/TV.

6. Reinsert only one (1) USB drive containing the prepared files into a vacant slot on top of the PS3 case; make sure it is inserted correctly with the side facing outwards towards you looking down at its top surface - do not try reversing this step!

7. Press and hold both 'PS' buttons simultaneously while powering up your console again by pressing either button until you see an orange light flicker briefly before settling into a normal boot mode.

8. Once booted normally without any further prompts appearing on screen press Triangle + X together then Circle once more quickly after seeing these three colored lights flash in sequence: blue followed immediately afterwards by red which should indicate successful installation of the custom firmware (CFW).

9. If everything went smoothly so far navigate through menus until reaching 'Settings' > 'System Information,' hereunder look for something like 'FW Version.' It should now display v4.81 instead of whatever official Sony software was previously running on your system; this indicates successful jailbreak completion!

Common Causes and Solutions

Despite following these steps precisely, you may still encounter issues during the installation process. Below are some common causes along with their respective fixes:

1. Using an incompatible firmware version: Ensure that the CFW file you've downloaded is compatible with both your PS3 model and current system software (firmalversion). Check official websites for compatibility charts before attempting to jailbreak.

2. Corrupted or damaged USB storage device : Try using a different, brand new USB stick as sometimes physical damage can prevent successful data transfer between devices.

- Format the affected drive by right-clicking on it in My Computer/Explorer and selecting 'Format' (NTFS/FAT32) followed by safely ejecting it before attempting again.

3. Checksum errors during file transfer : Ensure that you've correctly downloaded the C Jailbreak firmware package from a trusted source and verify its integrity using a SHA-1 or MD5 checksum tool available online to rule out corruption during download/transfer stages.

By carefully following these troubleshooting steps, most users should be able to overcome 'the data is corrupted' errors when attempting to jailbreak their PS3 console. Remember always to exercise caution when tinkering with firmware on your gaming system and only use trusted sources for downloads to minimize the risk of bricking or voiding warranties.

The data is corrupted 8002f957 ps3 4.81